Description
What is a tile roof solar mounting system? A hook-and-rail racking solution for pitched roofs covered with tiles (clay, concrete, glazed, slate, or asphalt shingle). A metal hook is fixed to the roof rafter, its top rises above the tile line, and aluminum rails clamped onto the hooks support the solar panels.
Why SUPER SOLAR tile roof racking?
Three roof-type series
● — glazed tile, slate, and asphalt shingle hooks in one catalog
Stainless steel SUS304 hooks
● — corrosion-proof, built for decades on the roof
Height-adjustable
● — vertical slots fine-tune the hook to your tile profile
No tile cutting
● — hooks slip between/over tiles, roof stays intact
Complete kit
● — rails, splices, hooks, and clamps from one supplier
In-house production
● — manufactured, quality-checked, and packed at our own factory
4. Key Features & Benefits
4.1 Complete Component Kit
Component | Function |
A — Rail mount rail | Extruded aluminum rail (AL6005-T5) with channels for clamps, mounted on the hooks |
B — Rail splice | Joins two rail sections for continuous runs |
C — Tile roof hook | Stainless steel hook with multi-holed base plate; screws into the rafter and rises above the tiles |
D — Mid clamp | T-shaped clamp securing the edges of two adjacent panels |
E — End clamp | Z-shaped clamp securing the outer edge of the end panel |
4.2 Three Roof-Type Hook Series
Series | Roof Type | Models |
Glazed tile roof | Clay/concrete glazed (S-shaped) tiles | SS-TRH-001 / 002 / 004 / 005 / 006 / 008 / 013 / 014 |
Slate roof | Natural/fiber slate | SS-TRH-009 / 010 |
Asphalt shingle roof | Asphalt shingles | SS-TRH-011 / 012 |
SUS304 plate hooks | Multi-purpose wide-plate design | SS-TRH-C01 / C03 |
AL6005-T5 hook series | Aluminum assembly hooks | SS-TRH-A16 / A18 |
Different riser shapes (Z-bend, S-curve, angled, C-top) and base designs let you pick the exact hook for your tile profile.
4.3 Height & Position Adjustable
Vertical adjustment
● — the hook top connects to the rail through an elongated slot, adjustable to the tile height
Lateral adjustment
● — slotted base plates allow side positioning before final tightening
Wide fixing bases
● — multi-hole base plates (up to 3×3 hole grids) spread the load across the rafter
4.4 No Tile Cutting, No Leaks
The hook is screwed directly into the wooden rafter and its body curves up through the tile line — the tiles themselves stay unmodified, keeping the roof watertight and visually clean.
4.5 Corrosion-Resistant Materials
Hooks:
● Stainless steel SUS304 — immune to rust in outdoor conditions
Rails:
● Aluminum AL6005-T5, anodized for long service life
● No galvanic corrosion between hook and rail components
4.6 Factory-Direct Production
Produced in our own facility — hundreds of brackets per production run with pre-drilled mounting holes, consistent quality, and stable supply.
5. Technical Specifications
Parameter | Specification |
Application | Pitched tile roofs (glazed, slate, asphalt shingle) |
Hook material | Stainless steel SUS304 |
Rail material | Aluminum AL6005-T5, anodized |
Hook adjustment | Vertical height slot + lateral slotted base |
Fixing | Hook screwed into roof rafter; panels clamped to rails |
Kit contents | Rails, rail splices, tile hooks, mid clamps, end clamps |
Panel orientation | Portrait or landscape, per project layout |
Roof impact | No tile cutting, roof structure intact |
6. Installation Steps (How It Works)
Locate rafters
1. — mark rafter positions under the tiles
Fix the hooks
2. — screw each tile hook’s base plate into the rafter; the hook body rises through the tile line
Adjust height
3. — set hook height to match the tile profile using the adjustment slots
Mount the rails
4. — clamp aluminum rails onto the hooks; splice sections for long runs
Install panels
5. — place panels on the rails
Clamp & tighten
6. — mid clamps between panels, end clamps on the edges, torque all bolts
7. Packaging & Shipping
● Seaworthy export packaging — components packed in cartons/pallets for container shipment
● Complete installation documentation included
● Worldwide shipping available from our export base
8. Why Choose SUPER SOLAR (One Supplier)
In-house factory
● — hooks, rails, and clamps manufactured under one roof (production photos available)
Full model range
● — SS-TRH series covers glazed tile, slate, and shingle roofs
Factory-direct pricing
● — no middlemen
Design support
● — hook selection and rail layout guidance per project
Full export service
● — packaging, documentation, and logistics coordination
9. FAQ (for listing Q&A section)
Q: Which roof types does this system support? A: Glazed tile, slate, and asphalt shingle roofs — each has its own dedicated hook series (SS-TRH models).
Q: Do I need to cut the roof tiles? A: No. The hook curves up through the tile line without modifying the tiles, so the roof stays watertight.
Q: Can the hook height be adjusted? A: Yes. Slotted connections allow vertical and lateral adjustment before final tightening, to match your tile profile.
Q: What materials are used? A: Stainless steel SUS304 hooks and anodized aluminum AL6005-T5 rails — both corrosion-resistant.
Q: What is included in the kit? A: Aluminum rails, rail splices, tile roof hooks, mid clamps, and end clamps.
10. Assumptions & Placeholders
The copy above is based solely on the 4 product images provided (factory production photo, hardware close-ups, hook catalog with model codes, and application diagram with cutaway view). Product codes and model numbers are quoted from the manufacturer’s catalog image. No claims beyond what the images show have been made.
Placeholders to confirm before publishing:
● Hook load rating (per-hook weight capacity)
● Rail length options
● Wind / snow load ratings (tested values)
● Certifications (CE / ISO / TÜV / SGS — confirm for this system)
● MOQ, lead time, pricing, payment & shipping terms
● Warranty period
